R2511-HP MSR Router Series Fundamentals Command Reference(V5)

136
Table 28 Command output
Field Descri
p
tion
No Serial number of the bad blocks.
Physical block Serial number of the physical pages with bad blocks.
3200 block(s) total, 3 block(s) bad. Total number of blocks and bad blocks in the NAND Flash memory.
display nandflash page-data
Use display nandflash page-data to display the data on the specified physical page in the NAND Flash
memory.
Syntax
display nandflash page-data page-value [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
page-value: Serial number of a physical page.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The following matrix shows the display nandflash page-data command and router compatibility:
Hardware Command com
p
atible
MSR900 No.
MSR93X Yes.
MSR20-1X No.
MSR20 No.
MSR30 Yes only on MSR30-10, MSR30-11E, and MSR30-11F.
MSR50 No.
MSR1000 Yes.
This command is always used in combination with the display nandflash file-location command to check
the correctness of the data in the NAND Flash memory.