R2511-HP MSR Router Series Fundamentals Command Reference(V5)

29
TFTP configuration commands
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes except on MSR30-16.
MSR50 Yes.
MSR1000 Yes.
NOTE:
TFTP is not available in FIPS mode.
display tftp client configuration
Use display tftp client configuration to display source IP address configuration of the TFTP client.
Syntax
display tftp client configuration [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The display tftp client configuration command displays the source IP address configuration of the TFTP
client. If the specified source IP address is active, this command displays the source IP address. If the
specified source interface is active, this command displays the source interface.