R2511-HP MSR Router Series Fundamentals Command Reference(V5)

36
Software upgrade commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes (except the MSR30-16).
MSR50 Yes.
MSR1000 Yes.
boot-loader
Use boot-loader to specify a startup system software image for the device.
Syntax
boot-loader file file-url { main | backup }
Views
User view
Default command level
3: Manage level
Parameters
file file-url: Specifies a file name, a string of 1 to 63 characters. If you enter a relative path, the system
automatically converts it to an absolute path. The absolute path can contain up to 63 characters. The file
name uses the drive:/file-name format or the file-name format, where:
• The drive argument specifies the storage medium where the file is saved. If the device has only one
storage medium, you can execute this command without providing this argument.
• The file-name argument specifies the file name, which must use the .bin extension.
main: Specifies the file as the main system software image. The main system software image has higher
priority than the backup system software image at startup.
backup: Specifies the file as the backup system software image. The backup system software image is
used at startup only if the main system software image is not available.