R2511-HP MSR Router Series Fundamentals Command Reference(V5)

41
display patch information
Use display patch information to display patch information.
Syntax
display patch information [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display patch information.
<Sysname> display patch information
The location of patches: flash:
Slot Version Temporary Common Current Active Running Start-Address
----------------------------------------------------------------------
0 20S001 0 1 1 0 1 0x310bd74
Table 36 Command output
Field Descri
p
tion
The location of patches
Patch file location. To configure the location, use the patch location
command.
Slot
Indicates the current device.
This field always displays 0.
Version
Patch version. The first three characters represent the suffix of the
PATCH-FLAG. For example, if the PATCH-FLAG of the card is PATCH-20S,
"20S" is displayed. The following three digits, if any, represent the patch
number. (The patch number can be read after the patch is loaded.)
Temporary
Number of temporary patches. These patches are interim solutions for fixing
critical bugs. They are not formally released.
Common
Number of common patches. These patches are formally released to users.
A common patch always includes the functions of its previous temporary
patches.
Current Total number of patches.
Running Number of patches in RUNNING state.
Active Number of patches in ACTIVE state.