R2511-HP MSR Router Series Fundamentals Command Reference(V5)

13
Login management commands
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes except on MSR30-16.
MSR50 Yes.
MSR1000 Yes.
acl (user interface view)
Use acl to reference ACLs to control access to the VTY user interface.
Use undo acl to cancel the ACL application.
Syntax
To use a basic or advanced ACL:
acl [ ipv6 ] acl-number { inbound | outbound }
undo acl [ ipv6 ] acl-number { inbound | outbound }
To use a WLAN or Ethernet frame header ACL:
acl acl-number inbound
undo acl acl-number inbound
Default
Access to the VTY user interface is not restricted.
Views
VTY user interface view
Default command level
2: System level
Parameters
ipv6: When this keyword is present, the command supports IPv6; otherwise, it supports IPv4.
acl-number: Specifies the number of the ACL. The value ranges are as follows:
• WLAN ACL—100 to 199. WLAN ACLs are not supported on MSR50 routers that use MPU-G2 cards
and MSR93X(except JG512A, JG519A and JG597A) routers.
• Basic IPv4 ACL—2000 to 2999.