R2511-HP MSR Router Series Fundamentals Command Reference(V5)

16
[Sysname-ui-console0] return
<Sysname> quit
2. Log in to the console user interface again.
The following message appears.
******************************************************************************
* Copyright (c) 2004-2014 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
Please press ENTER.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>
%Mar 2 18:40:27:981 2005 Sysname SHELL/5/LOGIN: Console login from con0
authentication-mode
Use authentication-mode to set the authentication mode for a user interface.
Use undo authentication-mode to restore the default.
Syntax
authentication-mode { none | password | scheme }
undo authentication-mode
Default
The authentication mode is password for VTY and AUX user interfaces, and none for console and TTY
user interfaces.
Views
User interface view
Default command level
3: Manage level
Parameters
none: Performs no authentication. This keyword is not available in FIPS mode.
password: Performs local password authentication. This keyword is not available in FIPS mode.
scheme: Performs AAA authentication. For more information about AAA, see Security Configuration
Guide.