R2511-HP MSR Router Series Fundamentals Command Reference(V5)

20
Examples
# Enable command accounting for VTY 0 so users logged in to VTY 0 can perform only the commands
authorized by the HWTACACS server.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] command authorization
databits
Use databits to specify the number of data bits for each character.
Use undo databits to restore the default.
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for each character.
Views
User interface view
Default command level
2: System level
Parameters
5: Uses five data bits for each character.
6: Uses six data bits for each character.
7: Uses seven data bits for each character.
8: Uses eight data bits for each character.
Usage guidelines
This command is only applicable to asynchronous serial interfaces, including AUX and console ports.
This setting must be the same as that on the configuration terminal.
Examples
# Configure AUX 0 to use 5 data bits for each character.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 5
display ip http
Use display ip http to display HTTP information.
Syntax
display ip http [ | { begin | exclude | include } regular-expression ]