R2511-HP MSR Router Series Fundamentals Command Reference(V5)

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display information about user interface 0.

<Sysname> display user-interface 0

Idx Type Tx/Rx Modem Privi Auth Int

+ 0 CON 0 9600 - 3 N -

+ : Current user-interface is active.

F : Current user-interface is active and work in async mode.

Idx : Absolute index of user-interface.

Type : Type and relative index of user-interface.

Privi: The privilege of user-interface.

Auth : The authentication mode of user-interface.

Int : The physical location of UIs.

A : Authentication use AAA.

L : Authentication use local database.

N : Current UI need not authentication.

P : Authentication use current UI's password.

Table 5 Command output

Field Description

Idx Absolute number of the user interface.

Type Type and relative number of the user interface.

Tx/Rx Transmit/receive rate of the user interface.

Modem

Whether the modem is allowed to dial in (in), dial out (out), or both (inout).

If modem dial-in is disabled, a hyphen (-) is displayed.

Privi Command level of a user under that user interface.

Auth

Authentication mode for the users:

• A—Scheme authentication mode.

• L—Local authentication mode (not supported).

• N—None authentication mode.

• P—Password authentication mode.

Int

Physical port that corresponds to the user interface.

The detailed port information is displayed only for TTY user interfaces. For console, AUX,

and VTY user interfaces, a hyphen (-) is displayed.

# Display summary information about all user interfaces.

<Sysname> display user-interface summary

User interface type : [CON]