R2511-HP MSR Router Series Fundamentals Command Reference(V5)

25
0:X
User interface type : [TTY]
1:XXXX XXXX XXXX XXXX
17:XXXX XXXX XXXX XXXX
33:XXXX XXXX XXXX XXXX
49:XXXX XXXX XXXX XXXX
65:XXXX XXXX XXXX XXXX
User interface type : [AUX]
81:X
User interface type : [VTY]
82:XUXU U
3 character mode users. (U)
83 UI never used. (X)
3 total UI in use
Table 6 Command output
Field Description
0:X
0 represents the absolute number of the user interface. If the user interface is not used,
an X is displayed. If the user interface is in use, a U is displayed. For example, 9:UXXX
X shows that the absolute number of the first user interface is 9, and the user interface is
in use. User interfaces 10, 11, 12, and 13 are not in use.
display users
Use display users to display information about the user interfaces being used.
Use display users all to display information about all user interfaces supported by the device.
Syntax
display users [ all ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays information about all user interfaces the device supports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples