R2511-HP MSR Router Series Fundamentals Command Reference(V5)

35
Default
The following matrix shows the default HTTP service status and hardware compatibility:
Hardware Default status of the HTTP service
MSR900 Enabled
MSR93X Enabled
MSR20-1X Enabled
MSR20 Disabled
MSR30 Disabled
MSR50 Disabled
MSR1000 Enabled
Views
System view
Default command level
2: System level
Usage guidelines
This command is not available in FIPS mode.
The device can act as the HTTP server that can be accessed only after the HTTP service is enabled.
Examples
# Enable the HTTP service.
<Sysname> system-view
[Sysname] ip http enable
# Disable the HTTP service.
<Sysname> system-view
[Sysname] undo ip http enable
Related commands
display ip http
ip http port
Use ip http port to configure the port number of the HTTP service.
Use undo ip http port to restore the default.
Syntax
ip http port port-number
undo ip http port
Default
The port number of the HTTP service is 80.
Views
System view