R2511-HP MSR Router Series Fundamentals Command Reference(V5)

43
Syntax
redirect disconnect
Views
User interface view
Default command level
2: System level
Usage guidelines
This command is supported only on AUX and TTY user interfaces.
This command is applicable to user interfaces on which redirect is enabled. To enable redirect on a user
interface, use the redirect enable command.
Examples
# Manually terminate redirected Telnet connections.
<Sysname> system-view
[Sysname] user-interface tty 1
[Sysname-ui-tty1] redirect disconnect
redirect enable
Use redirect enable to enable Telnet redirect for the current user interface.
Use undo redirect enable to disable this function.
Syntax
redirect enable
undo redirect enable
Default
The Telnet redirect function is disabled.
Views
User interface view
Default command level
2: System level
Usage guidelines
This command is supported only on AUX and TTY user interfaces.
Before using the redirect function or configuring redirect service related parameters, use this command to
enable redirect.
The stop bit setting must be the same for the user interfaces of the connecting ports on the device and the
target terminal device for communication. Before enabling redirect, use the stopbit-error intolerance
command to check their settings.
Examples
# Enable redirect on user interface TTY 7.
<Sysname> system-view
[Sysname] user-interface tty 7