R2511-HP MSR Router Series Fundamentals Command Reference(V5)

53
stopbit-error intolerance
undo stopbit-error intolerance
Default
Stop bits detection is disabled.
Views
User interface view
Default command level
2: System level
Usage guidelines
This command is only applicable to asynchronous serial interfaces, including AUX and console ports.
Examples
# Enable stop bits detection for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] stopbit-error intolerance
Related commands
stopbits
stopbits
Use stopbits to specify the number of stop bits for a character.
Use undo stopbits to restore the default.
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
Default
One stop bit is used.
Views
User interface view
Default command level
2: System level
Parameters
1: Uses one stop bit.
1.5: Uses one and a half stop bits.
2: Uses two stop bits.
Usage guidelines
This command is only applicable to asynchronous serial interfaces, including AUX and console ports.