R2511-HP MSR Router Series Fundamentals Command Reference(V5)

62
Device management commands
The following matrix shows the storage media supported on different router models:
Hardware Su
pp
orted stora
g
e media
MSR900
• Flash memory
• USB disk
MSR93X
• Flash memory
• USB disk
MSR20-1X
• Flash memory
• USB disk
MSR20
• CF card
• USB disk
MSR30
• Flash memory (supported by the MSR30-10, MSR30-11E, and MSR30-11F)
• CF card (supported by the MSR30-16, MSR30-20, MSR30-40, and MSR30-60)
• USB disk
MSR50
• Flash memory (not supported by the MPUF)
• CF card
• USB disk
MSR1000
• Flash memory
• USB disk
The examples in this chapter uses the flash memory.
card-mode
Use card-mode to set the working mode of an interface card.
Syntax
card-mode slot slot-number mode-name
Views
System view
Default command level
2: System level
Parameters
slot slot-number: Specifies the slot number of an interface card.
mode-name: Specifies a working mode. This argument might take one of the following values, which
depends on the interface card type.
• e: Specifies the E mode (including E1 and E3).
• t: Specifies the T mode (including T1 and T3).
• e1: Sets the working mode of the CPOS interface card to E1.