R2511-HP MSR Router Series Fundamentals Command Reference(V5)

63
• t1: Sets the working mode of the CPOS interface card to T1.
• ipsec: Sets the working mode of the ESM interface card to IPsec.
• ssl: Sets the working mode of the ESM interface card to SSL.
• atm: Sets the working mode of the G.SHDSL.BIS interface card to ATM.
• auto: Sets the working mode of the G.SHDSL.BIS interface card to Auto.
• efm: Sets the working mode of the G.SHDSL.BIS interface card to Ethernet first mile (EFM).
• ppp: Sets the working mode of the 3G modem interface card to PPP.
• ethernet: Sets the working mode of the 3G modem interface card to Ethernet.
Usage guidelines
To make the configured working mode take effect, restart the device or hot swap the interface card (if the
interface card supports hot swapping) after you change the working mode.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
card-mode No No No Yes Yes Yes Yes
Examples
# Set the working mode of the G.SHDSL.BIS interface card in slot 5 to EFM.
<Sysname> system-view
[Sysname] card-mode slot 5 efm
clock datetime
Use clock datetime to set the system time and date.
Syntax
clock datetime time date
Views
User view
Default command level
3: Manage level
Parameters
time: Specifies a time, in the hh:mm:ss format. The hh value is in the range of 00 to 23, the mm value is
in the range of 00 to 59, and the ss value is in the range of 00 to 59. Zeros can be omitted, unless you
specify 00:00:00.
date: Specifies a date, in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY value is in the range
of 2000 to 2035, the MM value is in the range of 1 to 12, and the DD value is in the range of 1 to 31.
Usage guidelines
You can leave the ss field blank when you specify the time parameters.
Examples
# Set the current system time to 14:10:20 08/01/2005.
<Sysname> clock datetime 14:10:20 8/1/2005