R2511-HP MSR Router Series High Availability Command Reference(V5)

52
# When VRRP operates in standard mode, display detailed information about all VRRP groups on the
router.
<Sysname> display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface Ethernet1/1
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 150 Running Pri : 140
Preempt Mode : Yes Delay Time : 10
Auth Type : Simple Key : hello
Virtual IP : FE80::1
Virtual MAC : 0000-5e00-0201
Master IP : FE80::2
VRRP Track Information:
Track Interface: Eth1/2 State : Down Pri Reduced : 10
Track Object : 1 State : Positive Pri Reduced : 50
Table 17 Command output (standard mode)
Field Descri
p
tion
Run Mode
Current VRRP working mode:
• Standard—Standard mode.
• Load Balance—Load balancing mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the
VRRP group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of the
VRRP group is mapped to the virtual MAC address.
Total number of virtual routers Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group.
Adver Timer VRRP advertisement interval in centiseconds.
Admin Status
Administrative state:
• UP.
• DOWN.
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
Config Pri
Configured priority of the router, or in other words, the priority value specified
by using the vrrp ipv6 vrid priority command.