R2511-HP MSR Router Series High Availability Command Reference(V5)

3
undo bfd echo-source-ip
Views
System view
Default command level
2: System level
Parameters
ip-address: Source IP address of BFD echo packets.
Usage guidelines
Do not configure the source IP address of the BFD echo packets to belong to the same network segment
as any interface address of the device. Otherwise a large amount of ICMP redirect packets might be sent
by the remote device, causing network congestion.
Examples
# Configure the source IP address of echo packets as 10.1.1.1.
<Sysname> system-view
[Sysname] bfd echo-source-ip 10.1.1.1
bfd min-echo-receive-interval
Use bfd min-echo-receive-interval to configure the minimum interval for receiving BFD echo packets.
Use undo bfd min-echo-receive-interval to restore the default minimum interval for receiving BFD echo
packets.
Syntax
bfd min-echo-receive-interval value
undo bfd min-echo-receive-interval
Default
The minimum interval for receiving BFD echo packets is 400 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies the minimum interval for receiving BFD echo packets, in the range of 200 to 1000
milliseconds. The value must be a multiple of 100.
Examples
# Configure the minimum interval for receiving BFD echo packets on Ethernet 1/1 as 500 milliseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] bfd min-echo-receive-interval 500