R2511-HP MSR Router Series High Availability Command Reference(V5)

4
bfd min-receive-interval
Use bfd min-receive-interval to configure the minimum interval for receiving BFD control packets.
Use undo bfd min-receive-interval to restore the default minimum interval for receiving BFD control
packets.
Syntax
bfd min-receive-interval value
undo bfd min-receive-interval
Default
The minimum interval for receiving BFD control packets is 400 milliseconds.
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies the minimum interval for receiving BFD control packets, in the range of 200 to 1000
milliseconds. The value must be a multiple of 100.
Usage guidelines
If the remote device sends BFD control packets at an interval shorter than the minimum receiving interval
of the local device, the remote device changes its sending interval to the minimum receiving interval of
the local device.
Examples
# Configure the minimum interval for receiving BFD control packets on Ethernet 1/1 as 500 milliseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] bfd min-receive-interval 500
bfd min-transmit-interval
Use bfd min-transmit-interval to configure the minimum interval for transmitting BFD control packets.
Use undo bfd min-transmit-interval to restore the default minimum interval for transmitting BFD control
packets.
Syntax
bfd min-transmit-interval value
undo bfd min-transmit-interval
Default
The minimum interval for transmitting BFD control packets is 400 milliseconds.
Views
Interface view