R2511-HP MSR Router Series High Availability Configuration Guide(V5)

• The Negative state of the track entry shows that the object is not available, and the apply clause is

invalid.

• The Invalid state of the track entry shows that the apply clause is valid.

The following objects can be associated with a track entry:

• Outgoing interface.

• Next hop.

• Default outgoing interface.

• Default next hop.

Configuration prerequisites

Before you associate Track with PBR, create a policy or a policy node and configure the match criteria as

well.

Configuration procedure

You can associate a nonexistent track entry with PBR. The association takes effect only after you use the

track command to create the track entry. For more information about PBR, see Layer 3—IP Routing

Configuration Guide.

To associate Track with PBR:

Step Command Remarks

1. Enter system view.

system-view

N/A

2. Create a policy or policy

node and enter PBR policy

node view.

policy-based-route policy-name [ deny |

permit ] node node-number

N/A

3. Define a match criterion.

• Define a packet length match criterion:

if-match packet-length min-len max-len

• Define an ACL match criterion:

if-match acl acl-number

Optional.

By default, no packets are

filtered.