R2511-HP MSR Router Series Interface Command Reference(V5)

101
Usage guidelines
This command is available only on the following routers:
• JG596A
• JG704A
• JG665A
• MSR routers with the SIC-4G-LTE module.
Examples
# Enable GPS, and set the GPS mode to standalone on Cellular-Ethernet 1/0.
<Sysname> system-view
[Sysname] interface Cellular-Ethernet1/0
[Sysname-Cellular-Ethernet1/0] gps mode standalone
gps nmea
Use gps nmea to enable GPS NMEA stream state.
Use undo gps nmea to restore the default.
Syntax
gps nmea
undo gps nmea
Default
GPS NMEA stream state is disabled.
Views
Cellular interface view, cellular Ethernet interface view
Default command level
2: System level
Parameters
N/A
Usage guidelines
This command is available only on the following routers:
• JG596A
• JG704A
• JG665A
• MSR routers with the SIC-4G-LTE module.
Examples
# Enable GPS NMEA stream state on Cellular-Ethernet 1/0.
<Sysname> system-view
[Sysname] interface Cellular-Ethernet1/0
[Sysname-Cellular-Ethernet1/0] gps mode standalone