R2511-HP MSR Router Series Interface Command Reference(V5)

107
Default command level
2: System level
Parameters
puk: Personal Unblocking Code (PUK) of the SIM/UIM card inserted into the modem. A PUK has eight
digits and is provided by the service provider.
new-pin: New Personal Identification Number (PIN) to be set, comprising four to eight digits.
Usage guidelines
During a PIN verification, if the wrong PIN is typed three times in a row, the SIM/UIM card will be locked.
In this case, you need to enter the PUK to unlock the SIM/UIM card, thus restoring the data
communications functions of the 3G/4G modem.
Examples
# Use the PUK code to unlock the PIN of the SIM/UIM card, and set a new PIN.
<Sysname> system-view
[Sysname] interface cellular 0/0
[Sysname-Cellular0/0] pin unlock 87654321 1234
Warning: PIN will be unlocked and changed to "1234". Continue? [Y/N]:y
PIN has been unlocked changed successfully.
pin verification
Use pin verification to enable or disable PIN verification for the 3G modem.
Syntax
pin verification { enable | disable } pin
Views
Cellular interface view, cellular Ethernet interface view
Default command level
2: System level
Parameters
enable: Enables PIN verification.
disable: Disables PIN verification.
pin: PIN of the SIM/UIM card inserted into the modem, comprising four to eight digits.
Examples
# Enable PIN verification.
<Sysname> system-view
[Sysname] interface cellular 0/0
[Sysname-Cellular0/0] pin verification enable 1234
pin verify
Use pin verify to perform PIN verification for the 3G modem.