R2511-HP MSR Router Series Interface Command Reference(V5)

113
Usage guidelines
Before collecting traffic statistics within a specific period of time on an interface, you need to clear the
existing statistics.
• If you execute this command without specifying the cellular keyword, this command clears the
statistics of all interfaces.
• If you execute this command specifying the cellular keyword but not the value of the
interface-number argument, this command clears the statistics of all cellular interfaces.
• If you execute this command specifying both the cellular keyword and the value of the
interface-number argument, this command clears the statistics of the specified cellular interface.
Examples
# Clear the statistics of interface Cellular 1/0.
<Sysname> reset counters interface cellular 0/0
reset counters interface cellular-ethernet
Use reset counters interface cellular-ethernet to clear traffic statistics for a cellular Ethernet interface.
Syntax
reset counters interface [ cellular-ethernet [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
cellular-ethernet interface-number: Specifies a cellular Ethernet interface by its number.
Usage guidelines
To collect traffic statistics from an interface for a period of time, first clear the existing statistics on the
interface.
If the cellular-ethernet keyword is specified but the interface-number argument is not specified, the
command clears traffic statistics on all cellular Ethernet interfaces.
If both the cellular-ethernet keyword and the interface-number argument are specified, the command
clears statistics on the specified cellular Ethernet interface.
Examples
# Clear traffic statistics on Cellular-Ethernet 0/0.
<Sysname> reset counters interface cellular-ethernet 0/0
rssi
Use rssi to configure the RSSI monitoring thresholds. You can obtain the signal strength through
monitoring the RSSI values. The value of the mediumthreshold argument must be no less than the
lowthreshold argument.
Use undo rssi to restore the default.