R2511-HP MSR Router Series Interface Command Reference(V5)

120
Default command level
2: System level
Parameters
detect: Enables periodical detection on the interface.
rai: Remote Alarm Indication (RAI).
Usage guidelines
This command is applicable when the interface operates in CE1 mode.
Examples
# Disable RAI detection on CE1/PR1 interface E1 2/0.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] undo alarm detect ais
cable (CE1/PRI interface)
Use cable to set the cable type for a CE1/PRI interface.
Use undo cable to restore the default.
Syntax
cable { long | short }
undo cable
Default
The long keyword applies.
Views
CE1/PRI interface view
Default command level
2: System level
Parameters
long: Specifies the attenuation of receiver to be –43 dB.
short: Specifies the attenuation of receiver to be –10 dB.
Examples
# Set the cable length matching CE1/PRI interface E1 2/0 to short.
<Sysname> system-view
[Sysname] controller e1 2/0
[Sysname-E1 2/0] cable short
channel-set (CE1/PRI interface)
Use channel-set to bundle timeslots on the CE1/PRI interface into a channel-set.
Use undo channel-set to cancel the bundling.