R2511-HP MSR Router Series Interface Command Reference(V5)

129
Usage guidelines
This command applies to CT1/PRI interfaces and CE1/PRI interfaces only.
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93
X
MSR20-1X MSR20 MSR30 MSR50
MSR10
00
error-diffusion
restraint enable
No No No No Yes Yes Yes
Examples
# Enable error packets diffusion restraint.
<Sysname> system-view
[Sysname] error-diffusion restraint enable
error-diffusion restraint restart-channel
Use error-diffusion restraint restart-channel to restart the channel that has been shut down for the sake
of error packets diffusion restraint.
Syntax
error-diffusion restraint restart-channel serial interface-number:set-number
Views
System view
Default command level
2: System level
Parameters
serial interface-number:set-number: Number of channel formed by bundling CE1/PRI interfaces, where
interface-number is the number of the CE1/PRI interface, set-number is the number of the channel set.
Usage guidelines
This command applies to CT1/PRI interfaces and CE1/PRI interfaces only.
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50
MSR1
000
error-diffusion restraint
restart-channel
No No No No Yes Yes Yes
Examples
# Restart channel serial 2/0:0 that has been shut down due to error packets diffusion.
<Sysname> system-view
[Sysname] error-diffusion restraint restart-channel serial 2/0:0
frame-format (CE1/PRI interface)
Use frame-format to set the framing format on the CE1 interface.