R2511-HP MSR Router Series Interface Command Reference(V5)

148
Default command level
2: System level
Usage guidelines
This command applies to CT1/PRI interfaces and CE1/PRI interfaces only.
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93
X
MSR20-1X MSR20 MSR30 MSR50
MSR10
00
error-diffusion
restraint enable
No No No No Yes Yes Yes
Examples
# Enable error packet diffusion restraint.
<Sysname> system-view
[Sysname] error-diffusion restraint enable
error-diffusion restraint restart-channel
Use error-diffusion restraint restart-channel to bring up a channel previously shut down by the error
packet diffusion restraint function.
Syntax
error-diffusion restraint restart-channel serial interface-number:set-number
Views
System view
Default command level
2: System level
Parameters
serial interface-number:set-number: Specifies a channel formed on a CT1/PRI interface. The
interface-number argument is a CT1/PRI interface number, and the set-number argument is a channel set
number.
Usage guidelines
This command applies to CT1/PRI interfaces and CE1/PRI interfaces only.
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93
X
MSR20-1X MSR20 MSR30 MSR50
MSR100
0
error-diffusion
restraint
restart-channel
No No No No Yes Yes Yes
Examples
# Bring up channel Serial 2/0:0 (assuming that the channel is shut down by the error packet diffusion
restraint function).