R2511-HP MSR Router Series Interface Command Reference(V5)

161
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fe1 clock master
fe1 code
Use fe1 code to set the line code format for the E1-F interface.
Use undo fe1 code to restore the default.
Syntax
fe1 code { ami | hdb3 }
undo fe1 code
Default
The line code format for the E1-F interface is HDB3.
Views
E1-F interface view
Default command level
2: System level
Parameters
ami: Adopts AMI line code format.
hdb3: Adopts HDB3 line code format.
Usage guidelines
Keep the line code format of the interface in consistency with the one used on the remote device.
To ensure the normal operation of the interface, configure the fe1 data-coding inverted command on it
when its line code format is set to AMI.
Examples
# Set the line code format of E1-F interface Serial 2/0 to AMI.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fe1 code ami
Related commands
fe1 data-coding
fe1 data-coding
Use fe1 data-coding normal to disable user data inversion for an E1-F interface.
Use fe1 data-coding inverted to enable user data inversion for an E1-F interface.
Use undo fe1 data-coding to restore the default.
Syntax
fe1 data-coding { inverted | normal }
undo fe1 data-coding