R2511-HP MSR Router Series Interface Command Reference(V5)

196
Syntax
reset counters controller e3 interface-number
Views
User view
Default command level
2: System level
Parameters
interface-number: Interface number.
Usage guidelines
You can use the display controller e3 command to display the statistics collected by the controller
counters of CE3 interfaces.
The reset counters interface command clears the counters of all interfaces. To clear the controller counter
of individual CE3 interfaces, use the reset counters controller e3 command.
Examples
# Clear the controller counter of the CE3 interface E3 2/0.
<Sysname> reset counters controller e3 2/0
using (CE3 interface)
Use using to configure the operating mode of the CE3 interface.
Use undo using to restore the default.
Syntax
using { ce3 | e3 }
undo using
Default
The operating mode is channelized mode.
Views
CE3 interface view
Default command level
2: System level
Parameters
ce3: Sets the CE3 interface to operate in channelized mode.
e3: Sets the CE3 interface to operate in unchannelized mode.
Usage guidelines
Only when the CE3 interface is operating in channelized mode can you configure E1 lines.
When the CE3 interface is operating in unchannelized mode, the system automatically creates a serial
interface numbered serial number/0:0 for it. This interface operates at 34.368 Mbps and is logically
equivalent to a synchronous serial interface on which you can make other configurations.