R2511-HP MSR Router Series Interface Command Reference(V5)

223
Last 300 seconds input rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec
Input: 0 packets, 0 bytes
0 errors, 0 runts, 0 giants,
0 CRC, 0 align errors, 0 overruns,
0 aborts, 0 no buffers
0 frame errors
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
# Display brief information about interface BRI 2/0.
<Sysname> display interface bri 2/0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Bri2/0 DOWN DOWN --
# Display brief information about all BRI interfaces in the DOWN state.
<Sysname> display interface bri brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Bri2/0 DOWN Not connected
# Display brief information about BRI interfaces, including their complete interface descriptions.
<Sysname> display interface bri brief description
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Bri2/0 DOWN DOWN -- The interface for connecting RouterG.
Table 28 Command output
Field Description
Bri2/0 current state
Physical state of the BRI interface:
• DOWN (Administratively)—The BRI interface has been shut
down with the shutdown command.
• DOWN—The BRI interface is physically down because no
physical link is present or the physical link has failed.
• UP—The BRI interface is both administratively and physically
up.
Line protocol current state Link protocol state of the interface.
Description Description of the interface.