R2511-HP MSR Router Series Interface Command Reference(V5)

231
Examples
# Display detailed information about interface ATM 3/0.
<Sysname> display interface atm 3/0
Atm3/0 current state :DOWN
Line protocol current state :DOWN
Description : Atm3/0 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
AAL enabled: AAL5, Maximum VCs: 128
Current VCs: 0 (0 on main interface)
ATM over E1, Scramble enabled, frame-format crc4-adm
code hdb3, clock slave,Cable-length long, loopback not set
Cable type: 75 ohm non-balanced
Line Alarm: LOS LOF
Line Error: 0 FERR, 0 LCV, 0 CERR, 0 FEBE
Last 0 seconds input rate 0.00 bytes/sec, 0.00 packets/sec
Last 0 seconds output rate 0.00 bytes/sec, 0.00 packets/sec
Input : 0 packets, 0 bytes, 0 buffers
0 errors, 0 crcs, 0 lens, 0 giants,
0 pads, 0 aborts, 0 timeouts
0 overflows, 0 overruns,0 no buffer
Output: 0 packets, 0 bytes, 0 buffers
0 errors, 0 overflows, 0 underruns
# Display brief information about interface ATM 3/0.
<Sysname> display interface atm 3/0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Atm3/0 UP UP(s) --
# Display brief information about ATM interfaces in the DOWN state.
<Sysname> display interface atm brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Atm3/0 DOWN Not connected
# Display brief descriptions about all ATM interfaces.
<Sysname> display interface atm brief description
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Atm3/0 UP UP(s) -- The interface for connecting RouterB.
Atm3/1 DOWN DOWN(s) -- --