R2511-HP MSR Router Series Interface Command Reference(V5)

240
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in DOWN state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the ima-group keyword, this command displays information about all interfaces on
the device.
If you specify the ima-group keyword without the group-interface-number argument, this command
displays information about all existing IMA group interfaces.
Examples
# Display detailed information about IMA group interface 2/3.
<Sysname> display interface ima-group 2/3
Ima-group2/3 current state :DOWN
Line protocol current state :DOWN
Description : Ima-group3 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
AAL enabled: AAL5, Maximum VCs: 128
Current VCs: 0 (0 on main interface)
Physical layer is ATM over IMA
IMA-clock: CTC, active-links-minimum: 1
Frame-length: 128, differential-delay-maximum: 25
symmetry: symmetrical configuration and operation
Ima-group state:
ImaGroupNeState START_UP ImaGroupFeState START_UP
ImaGroupNeFailureStatus START_UP ImaGroupFeFailureStatus START_UP
Ima-Link state:
IMA Link Number : 1 , First Link: 0
Test Status: Disabled
Last 300 seconds input rate 0.00 bytes/sec, 0.00 packets/sec
Last 300 seconds output rate 0.00 bytes/sec, 0.00 packets/sec
Input : 0 packets, 0 bytes, 0 buffers
0 errors, 0 crcs, 0 lens, 0 giants,
0 pads, 0 aborts, 0 timeouts
0 overflows, 0 overruns,0 no buffer
Output: 0 packets, 0 bytes, 0 buffers
0 errors, 0 overflows, 0 underruns