R2511-HP MSR Router Series Interface Command Reference(V5)

248
Syntax
min-active-links number
undo min-active-links
Default
The minimum number of links is 1.
Views
IMA group interface view
Default command level
2: System level
Parameters
number: Number of links, in the range of 1 to 8.
Examples
# Set the minimum number of links required for IMA group 1 to operate to 2.
<Sysname> system-view
[Sysname] interface atm 2/0
[Sysname-Atm2/0] ima ima-group 1
[Sysname-Atm2/0] interface ima-group 2/1
[Sysname-Ima-group2/1] min-active-links 2
scramble
Use scramble to enable payload scrambling on the ATM E1/T1 interface. This, however, does not affect
cell headers.
Use undo scramble to disable payload scrambling.
Syntax
scramble
undo scramble
Default
Payload scrambling is enabled on an ATM E1/T1 interface.
Views
ATM E1 interface view, ATM T1 interface view
Default command level
2: System level
Usage guidelines
With payload scrambling enabled, the interface performs payload scrambling when transmitting data,
and payload descrambling when receiving data. Payload scrambling prevents consecutive 0s and 1s in
the payload.
Disabling payload scrambling disables both payload scrambling during data transmission and payload
descrambling during data receiving.