R2511-HP MSR Router Series Interface Command Reference(V5)

258
t1413: Specifies the T1.413 standard.
Usage guidelines
ADSL-I module does not support G.Lite (G992.2) standard and T1.413 standard.
To apply the standard configured by the adsl standard command immediately, re-activate the interface
by either the shutdown and undo shutdown commands or the activate and undo activate commands.
Examples
# Apply the standard T1.413 to ATM interface 1/0.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0]adsl standard t1413
[Sysname-Atm1/0] shutdown
[Sysname-Atm1/0]undo shutdown
adsl tx-attenuation
Use adsl tx-attenuation to set a transmit power attenuation for the ADSL interface.
Use undo adsl tx-attenuation to restore the default.
Syntax
adsl tx-attenuation attenuation
undo adsl tx-attenuation
Default
The transmit power attenuation is 1.
Views
ATM (ADSL) interface view
Default command level
2: System level
Parameters
attenuation: Transmit power attenuation in the range of 0 to 12.
Examples
# Set the transmit power attenuation to 10 for ATM ADSL interface 1/0.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] adsl tx-attenuation 10
bootrom update file
Use bootrom update file to upgrade software on an ADSL2+ card.
Syntax
bootrom update file file-url [ slot slot-no-list ] [ all | part ]
Default
The entire Boot ROM is upgraded.