R2511-HP MSR Router Series Interface Command Reference(V5)

262
Current Rate(kbps): 0 0
Latency: Intl Intl
Table 32 Command output
Field Descri
p
tion
Line Status
Line status of the ADSL interface:
• No Defect—Normal state.
• Loss Of Frame—Error concerning frame.
• Loss Of Signal—Error concerning signal.
• Loss Of Power—Error concerning power supply.
• Loss Of Signal Quality—Error concerning signal quality.
• Unknown—Unknown error.
Training Status
Training status of the ADSL interface:
• Idle—The interface is idle.
• G.994 Training—A G.994 training.
• G.992 Started—A G.992 training is launched.
• G.922 Channel Analysis—G.922 channel analysis is going on.
• G.992 Message Exchange—G.992 message exchange is
going on.
• Showtime—Normal data exchange.
• Unknown..
The following information appears after the line is activated.
Active Params
• Standard—Connection standard adopted by the interface and
the DSLAM.
• SNR—Signal-to-noise ration of the ADSL link.
• Attr—Attenuation of the ADSL link.
• Pwr—Transmit power of the ADSL module, in dbm.
• Current Rate—Uplink/downlink rate between the ADSL
interface and the DSLAM, in kbps.
• Latency—Way in which the interface and the DSLAM are
connected, which can be "Intl" (cross-over) and "Fast."
display dsl version
Use display dsl version to display the DSL version and support capabilities of the specified interface.
Syntax
display dsl version interface atm interface-number [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: Specifies a DSL interface to view the version and support capability information on it.