R2511-HP MSR Router Series Interface Command Reference(V5)

265
line. If it finds that the line performance is deteriorating, it automatically deactivates, retrains, and then
reactivates the line.
Examples
# Activate G.SHDSL interface ATM 3/0.
<Sysname> system-view
[Sysname] interface atm 3/0
[Sysname-Atm3/0] activate
display dsl configuration
Use display dsl configuration to display the configuration of a G.SHDSL interface.
Syntax
display dsl configuration interface atm interface-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: G.SHDSL interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the actual configurations of G.SHDSL interface ATM 3/0.
<Sysname> display dsl configuration interface atm 3/0
GSHDSL line parameter and mode Configuration
Mode: CPE
Standard: G.991.2
Annex: B
Wire Type: 2
Framing: 3
Line Rate: Auto Adaptive
Current Margin: 2
SNEXT margin: 0
Psd Mode: Sym PSD
LinkCheck: Disable
--Actual Handshake Status --
00: 0002 0000 0000 0000 0000 0000 0000 0000 0000 0000