R2511-HP MSR Router Series Interface Command Reference(V5)

266
10: 0000 0008 0000 0000 0000 0000 0000 0000 0008 0000
20: 0000 0000 0002 0002 0004 0010
--Local Handshake Status --
00: 0002 0001 0000 0000 0000 0000 0034 003f 003f 003f
10: 003f 003f 0003 0034 003f 003f 003f 003f 003f 0003
20: 0000 0000 0003 0003 000f 0010
--Remote Handshake Status --
00: 0002 0000 0000 0000 0000 0000 0030 003f 003f 003f
10: 003f 000f 0000 0030 003f 003f 003f 003f 000f 0000
20: 0000 0000 0003 0003 0004 0010
Table 34 Command output
Field Description
Mode
Operating mode, customer premises equipment (CPE) or central
office (CO).
Standard The supported standard.
Annex Available options are a and b.
Wire Type Two-wire system or four-wire system.
Framing Framing format.
SNR Threshold Signal to noise ratio threshold.
Current Margin Current margin.
SNEXT margin Worst-case margin.
Target Margin Target margin.
Line Rate Line rate.
PSD Mode Power spectral density mode: symmetric or asymmetric.
LinkCheck State of link check: enabled or disabled.
display dsl status
Use display dsl status to display status information about a G.SHDSL interface.
Syntax
display dsl status interface atm interface-number [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-number: G.SHDSL interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.