R2511-HP MSR Router Series Interface Command Reference(V5)

269
TxPower(dBm): 9.50
Power Backoff: enable
Power Backoff Level: 5
Tip/Ring Reversal: Reversed
FrmOH Stat: 0x00
Rmt Encoder A : 0x0000016e
Rmt Encoder B : 0x00000331
Rmt NSF Cusdata : 0x0000
Rmt NSF CusID : 0x0000
Rmt Country Code : 0x00b5
Rmt Provider Code: GSPN
Rmt Vendor Data: 0x12 0x34 0x56 0x78
0x12 0x34 0x56 0x78
Table 35 Command output
Field Description
Operating Mode CPE or CO.
DSL Mode Annex standard used on the interface: Annex A or Annex B.
Configured Wire Type Configured wire mode of the interface: two-wire or four-wire.
Line A Statistics since last activation Statistics about wire-pair A from the time of initiating to present.
CRC Count of CRC errors.
LOSW Defect Count of loss of synchronization word defects.
ES Error second, count of errors per second.
SES Severely error second, count of severe errors per second.
UAS
Unavailable second, count of one-second intervals for which the
G.SHDSL line is unavailable.
TX EOC Count of transmitted EOC cells.
RX EOC Count of received EOC cells.
Line A status State of wire-pair A.
Xcvr Op State: Data Mode Operating state of the receiver.
Last Fail Op State Operating state of the receiver when the last negotiation failed.
Frame Sync State of frame synchronization.
Line Rate(Kbps) Negotiated wire-pair speed.
Wire Type Wire type: four-wire, or two-wire.
SNR Margin(dB) Margin to SNR.
Loop Attenuation(dB) Loop attenuation.
RecvGain(dB) Receive gain.
TxPower(dBm) Transmit power.
Power Backoff State of power compensation.
Power Backoff Level Level of power compensation.
Tip/Ring Reversal State of Tip/Ring reverse.