R2511-HP MSR Router Series Interface Command Reference(V5)

272
[Sysname-Atm1/0] shdsl annex a
shdsl capability
Use shdsl capability to set the capacity type of the G.SHDSL interface.
Use undo shdsl capability to restore the default.
Syntax
shdsl capability { auto | g-shdsl | g-shdsl-bis }
undo shdsl capability
Default
On a G.SHDSL interface in CPE mode, the g-shdsl, g-shdsl-bis, and auto keywords are available, and
the auto keyword applies.
On a G.SHDSL interface in CO mode, only the g-shdsl and g-shdsl-bis keywords are available, and the
g-shdsl-bis keyword applies.
Views
ATM (G.SHDSL) interface view
Default command level
2: System level
Parameters
auto: Specifies the auto mode (available only in CPE mode).
g-shdsl: Specifies the G.SHDSL mode
g-shdsl-bis: Specifies the G.SHDSL.bis mode.
Usage guidelines
When you configure the shdsl mode command, the default settings in each mode are automatically
restored.
Examples
# Configure the capacity type of interface ATM 1/0 as G.SHDSL.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] shdsl capability g-shdsl
shdsl line-probing
Use the shdsl line-probing enable command to enable SHDSL line probing.
Use the undo shdsl line-probing enable command to disable SHDSL line probing.
Syntax
shdsl line-probing enable
undo shdsl line-probing enable
Default
Probing is enabled for SHDSL lines.