R2511-HP MSR Router Series Interface Command Reference(V5)

280
POS interface configuration commands
The following matrix shows the feature and router compatibility:
Feature MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR10
00
POS interface No No No No Yes Yes No
bandwidth
Use bandwidth to set the expected bandwidth for a POS interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
POS interface view
Default command level
2: System level
Parameters
bandwidth-value: Expected bandwidth for the POS interface, in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the expected bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The expected bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the expected bandwidth to 1000 kbps for POS 1/0.
<Sysname> system-view
[Sysname] interface pos 1/0
[Sysname-Pos1/0] bandwidth 1000
clock
Use clock to set the clock mode of a POS interface.
Use undo clock to restore the default.
Syntax
clock { master | slave }