R2511-HP MSR Router Series Interface Command Reference(V5)

284
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the pos keyword, this command displays information about all interfaces on the
device.
If you specify the pos keyword without the interface-number argument, this command displays
information about all existing POS interfaces.
Examples
# Display detailed information about POS 8/0.
<Sysname> display interface pos 8/0
Pos8/0 current state: DOWN
Line protocol current state: DOWN
Description: Pos8/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 5.5.5.2/24 Primary
Link layer protocol is PPP
LCP initial
Physical layer is Packet Over SONET, Baudrate is 155520000 bps
Scramble enabled, crc 32, clock slave, loopback not set
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
SDH alarm:
section layer: OOF LOF LOS
line layer: AIS
path layer: AIS RDI
C2(Rx): 0xff C2(Tx): 0x16
Rx: J0: unknown
Tx: J0: ""
Rx: J1: unknown
Tx: J1: ""
SDH error:
section layer: B1 65535
line layer: B2 0 M1 0
path layer: B3 0 G1 0
Last clearing of counters: Never
Last 300 seconds input rate 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes
0 errors, 0 runts, 0 giants, 0 CRC,
0 overruns, 0 aborts, 0 no buffers
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 aborts