R2511-HP MSR Router Series Interface Command Reference(V5)

293
CPOS interface configuration commands
The following matrix shows the feature and router compatibility:
Feature MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR10
00
CPOS interface No No No No Yes Yes No
E1-related commands are available for CPOS (E) interface modules. T1-related commands are available
for CPOS (T) interface modules.
bandwidth
Use bandwidth to set the intended bandwidth for a CPOS interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
CPOS interface view
Default command level
2: System level
Parameters
bandwidth-value: Intended bandwidth for the CPOS interface, in the range of 1 to 4,294,967,295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by querying the ifspeed value of the MIB node
with third-party software.
The intended bandwidth is used for bandwidth monitoring of the network management, but does not
affect the actual bandwidth of the interface.
Examples
# Set the intended bandwidth to 1000 kbps for interface CPOS 1/0.
<Sysname> system-view
[Sysname] controller cpos 1/0
[Sysname-Cpos1/0] bandwidth 1000
clock
Use clock to set the clock mode of a CPOS interface.
Use undo clock to restore the default.