R2511-HP MSR Router Series Interface Command Reference(V5)

311
Syntax
t1 t1-number channel-set set-number timeslot-list range [ speed { 56k | 64k } ]
undo t1 t1-number channel-set set-number
Default
A T1 channel is not channelized.
Views
CPOS interface view
Default command level
2: System level
Parameters
t1-number: Number of a T1 channel on the CPOS interface, in the range of 1 to 84.
set-number: Channel set number, in the range of 0 to 23.
timeslot-list range: Specifies a comma-separated list of timeslot items. An item can be an individual
timeslot or a timeslot range. Use a hyphen (-) to separate the start and end timeslot numbers of a range.
The value range for the timeslot number is 1 to 24.
speed: Specifies how timeslots are bundled. If the 56k keyword applies, timeslots form an N × 56 kbps
bundle. If 64k applies, timeslots form an N × 64 kbps bundle. If the speed is not specified, the default
64 kbps applies.
Usage guidelines
The serial interface formed by a timeslot bundle uses the interface number/channel number:channel set
number format.
IMPORTANT:
Make sure the local end has the same timeslot bundling settings as the remote end for successful
communication.
Examples
# Bundle timeslots 1 through 23 into a channel set on T1 channel 1.
<Sysname> system-view
[Sysname] controller cpos 1/0
[Sysname-Cpos1/0] t1 1 channel-set 1 timeslot-list 1-23
# Enter the view the serial interface created for the channel set.
[Sysname-Cpos1/0] quit
[Sysname] interface serial 1/0/1:1
[Sysname-Serial1/0/1:1]
Related commands
t1 unframed
t1 set clock
Use t1 set clock to set the clock mode of a T1 channel.
Use undo t1 set clock to restore the default.