R2511-HP MSR Router Series Interface Command Reference(V5)

42
[Sysname] interface ethernet 2/0.1
[Sysname-Ethernet2/0.1] mtu 1400
promiscuous
Use promiscuous to configure a Layer 3 Ethernet interface to operate in promiscuous mode.
Use undo promiscuous to cancel the promiscuous operating mode.
Syntax
promiscuous
undo promiscuous
Default
A Layer 3 Ethernet interface does not operate in promiscuous mode.
Views
Layer 3 Ethernet interface view
Examples
# Configure Ethernet 2/0 to operate in promiscuous mode.
<Sysname> system-view
[Sysname] interface ethernet 2/0
[Sysname-Ethernet2/0] promiscuous
qmtoken
Use qmtoken to configure the maximum number of tokens that the QoS token function assigns to a Layer
3 Ethernet interface.
Use undo qmtoken to restore the default.
Syntax
qmtoken number
undo qmtoken
Default
The maximum number of tokens that the QoS token function assigns to a Layer 3 Ethernet interface is 512.
Views
Layer 3 Ethernet interface view
Parameters
number: Sets the maximum number of tokens that the QoS token function assigns to the Layer 3 Ethernet
interface. The token count represents the maximum number of packets that the bottom layer queue can
hold for the interface. This argument must be a power of 2 in the range of 4 to 1024.
Usage guidelines
The qos qmtoken command can cause an Ethernet interface to automatically shut down and go up.
The following matrix shows the command and router compatibility: