R2511-HP MSR Router Series Interface Command Reference(V5)

51
code
Use code to configure the digital signal coding format on the synchronous serial interface.
Use undo code to restore the default.
Syntax
code { nrz | nrzi }
undo code
Default
The digital signal coding format t is NRZ.
Views
Synchronous serial interface view
Default command level
2: System level
Parameters
nrz: Sets the digital signal coding format to nonreturn to zero (NRZ).
nrzi: Sets the digital signal coding format to nonreturn to zero inverted (NRZI).
Examples
# Set the digital signal coding format to NRZI on synchronous serial interface 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] code nrzi
country-code
Use country-code to set the coding format of the modem connected to the AM interface.
Use undo country-code to restore the default.
Syntax
country-code area-name
undo country-code
Default
The coding format of the modem connected to the AM is united-states.
Views
AM interface view
Default command level
2: System level
Parameters
area-name: Area name, which can be australia, austria, belgium, brazil, bulgaria, canada, china,
czechoslovakia, denmark, finland, france, germany, greece, hongkong, hungary, india, ireland, israel,
italy, japan, korea, luxembourg, malaysia, mexico, netherlands, new-zealand, norway, philippines,