R2511-HP MSR Router Series Interface Command Reference(V5)

59
0 errors, 0 runts, 0 giants
0 CRC, 0 align errors, 0 overruns
0 dribbles, 0 aborts, 0 no buffers
0 frame errors
Output:0 packets, 0 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
DCD=DOWN DTR=UP DSR=DOWN RTS=UP CTS=DOWN
# Display brief information about interface AUX 0.
<Sysname> display interface aux 0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Aux0 DOWN DOWN --
# Display brief information about all AUX interfaces in the DOWN state.
<Sysname> display interface aux brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Aux0 DOWN Not connected
# Display brief information about the AUX interface, including its complete interface description.
<Sysname> display interface aux brief description
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Aux0 DOWN DOWN -- The interface for Administer.
Table 12 Command output
Field Description
Aux0 current state
Current physical state of the AUX interface:
• DOWN (Administratively)—The AUX interface has been
shut down with the shutdown command.
• DOWN—The AUX interface is physically down because no
physical link is present or the physical link has failed.
• UP—The AUX interface is both administratively and
physically up.
Line protocol current state Link protocol state of the serial interface.
Description Description of the AUX interface.