R2511-HP MSR Router Series Interface Command Reference(V5)

73
Examples
# Set the MRU of interface serial 2/0 to 1500 bytes (assuming that the interface is an asynchronous serial
interface and operates in flow mode).
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] physical-mode async
[Sysname-Serial2/0] async mode flow
[Sysname-Serial2/0] phy-mru 1500
reset counters interface
Use reset counters interface to clear the statistics for cellular interfaces.
Syntax
reset counters interface [ analogmodem [ interface-number ] ]
Views
Use view
Default command level
2: System level
Parameters
analogmodem interface-number: Specifies an AM interface.
Usage guidelines
When you collect traffic statistics for a specific period of time on an AM interface, clear the existing
statistics on the interface.
• If you do not specify the analogmodem keyword, this command clears statistics on all interfaces.
• If you specify the analogmodem keyword without the interface-number argument, this command
clears statistics on all AM interfaces.
• If you specify both the analogmodem keyword and the interface-number argument, this command
clears statistics on a specified AM interface.
Examples
# Clear statistics on interface AM 2/0.
<Sysname> reset counters interface analogmodem 2/0
reset counters interface
Use reset counters interface to clear statistics on the specified AUX interface.
Syntax
reset counters interface [ aux [ interface-number ] ]
Views
Use view
Default command level
2: System level