R2511-HP MSR Router Series Interface Command Reference(V5)

77
Syntax
autodeploy sms enable
undo autodeploy sms enable
Default
SMS method of configuration deployment is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
SMS method of configuration deployment is available only on 3G modem embedded routers. The
feature enables an administrator to deploy initial configuration on the device by sending short messages
through a 3G network.
This command is not supported on SIC-4G-LTE modem embedded routers.
Examples
# Enable SMS method of configuration deployment.
[Sysname]undo autodeploy sms enable
display cellular
Use display cellular to display the call connection information of a 3G modem in PPP mode.
Syntax
display cellular interface-number all [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays all the call connection information for the 3G modem.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is not supported on SIC-4G-LTE modem embedded routers.
Examples
# Display call connection information on interface Cellular 0/0 (WCDMA mode).