R2511-HP MSR Router Series Interface Configuration Guide(V5)

15
Ste
p
Command Remarks
2. Enter Ethernet interface view.
interface interface-type
interface-number
N/A
3. Set the maximum number of
tokens for the interface.
qmtoken token-number
The default setting depends on the
router model.
Displaying and maintaining an Ethernet interface or
subinterface
Task Command Remarks
Display Ethernet interface
or subinterface information.
display interface [ interface-type ] [ brief [ down |
description ] ] [ | { begin | exclude | include }
regular-expression ]
display interface interface-type { interface-number |
interface-number.subnumber } [ brief
[ description ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display traffic statistics for
the specified interfaces.
display counters { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display traffic rate statistics
over the last sampling
interval.
display counters rate { inbound | outbound }
interface [ interface-type ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about a
manual port group or all
manual port groups.
display port-group manual [ all | name
port-group-name ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about
the loopback function.
display loopback-detection [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear the interface or
subinterface statistics.
reset counters interface [ interface-type
[ interface-number |
interface-number.subnumber ] ]
Available in user view.