R2511-HP MSR Router Series Interface Configuration Guide(V5)

22
Ste
p
Command Remarks
15. Select a WCDMA network
connection mode.
mode wcdma { gsm-only |
gsm-precedence | wcdma-only |
wcdma-precedence | lte-only | auto }
Optional.
16. Enable or disable PIN
verification for the 3G/4G
modem.
pin verification { enable | disable }
[ pin ]
Optional.
17. Perform PIN verification for
the 3G/4G modem.
pin verify [ simple | cipher ] pin
Optional.
By default, no PIN is set for the
SIM/UIM card installed on the
3G/4G modem.
18. Unlock the PIN.
pin unlock puk new-pin N/A
19. Modify the PIN.
pin modify current-pin new-pin N/A
20. Configure the RSSI
thresholds.
rssi { gsm | 1xrtt | evdo } { low
lowthreshold | medium
mediumthreshold }*
Optional.
By default, the lowthreshold is
–150, and the mediumthreshold is
0.
21. Set the intended bandwidth
for the cellular interface.
bandwidth bandwidth-value Optional.
22. Manually reboot the
3G/4G modem.
modem reboot
Optional.
A 3G/4G modem can
automatically detect running
errors and reboot. If the 3G/4G
modem fails to reboot by itself,
you can use this command to
manually reboot it.
23. Bind the 3G/4G modem to
the local IMSI.
trust-imsi IMSI-string
Optional.
By default, a 3G/4G modem is
not bound to the local IMSI.
24. Set the physical state
change suppression time
on the cellular interface.
link-delay delay-time
Optional.
By default, physical state change
suppression is disabled.
25. Restore the default settings
for the cellular interface.
default Optional.
26. Shut down the cellular
interface.
shutdown
Optional.
Up by default.
27. Bring up the cellular
interface.
undo shutdown
Optional.
Up by default.
28. Enable RSSI-based
interface backup.
standby rssi rssi-threshold interface
interface-type interface-number
[ delay delay-time ]
Optional.
By default, RSSI-based interface
backup is disabled.