R2511-HP MSR Router Series Interface Configuration Guide(V5)

25
Step Command Remarks
3. Enter interface view.
• Enter cellular interface view:
interface cellular
interface-number
• Enter cellular Ethernet interface
view:
interface cellular-ethernet
interface-number
Use the interface cellular command
if PPP encapsulation is specified.
Use the interface cellular-ethernet
command if Ethernet encapsulation
is specified.
4. Associate the cellular
interface with the track entry
and configure auto-recovery
parameters of 3G/4G
modem.
recovery track track-entry-number
delay delay-time consecutive times
By default, a cellular interface is
not associated with a track entry.
Configuring the 3G modem to send, delete, and forward short
messages
The 3G modem SMS function supports sending, receiving, deleting, displaying, and forwarding short
messages.
The SIC-4G-LTE modem module does not support sending, deleting, or forwarding short messages.
To configure the 3G modem to send, delete, and forward short messages:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Specify PPP or Ethernet
encapsulation on the 3G
modem module.
card-mode slot slot-num { ppp |
ethernet }
N/A
3. Enter interface view.
• Enter cellular interface view:
interface cellular
interface-number
• Enter cellular Ethernet interface
view:
interface cellular-ethernet
interface-number
Use the interface cellular command
if PPP encapsulation is specified.
Use the interface cellular-ethernet
command if Ethernet encapsulation
is specified.
4. Send a short message to the
specified number.
sms send destination-number Optional.
5. Delete the specified short
messages or all short
messages from the SIM card.
sms delete { all | sms-id id } Optional.