R2511-HP MSR Router Series Interface Configuration Guide(V5)

76
Configuration procedure
To configure an EFM interface:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter EFM interface view.
interface efm interface-number N/A
3. Set the intended bandwidth
for the EFM interface.
bandwidth bandwidth-value Optional.
4. Restore the default settings for
the EFM interface.
Default Optional.
NOTE:
Configure ARP, DHCP, IP address, and firewall on an EFM interface as needed.
Configuring the working mode of an interface card
No dedicated but multi-purpose EFM cards are available. Switch the working mode of an interface card
as needed. For more information about the working modes of an interface card, see Fundamentals
Configuration Guide.
Displaying and maintaining ATM and DSL
interfaces
Task Command Remarks
Display information about a
specified or all ATM or DSL
interfaces.
display interface [ atm ] [ brief [ down |
description ] ] [ | { begin | exclude |
include } regular-expression ]
display interface atm interface-number
[ brief [ description ] ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the actual configuration of
a DSL line.
display dsl configuration interface atm
interface-number [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the state information of a
DSL line.
display dsl status interface atm
interface-number [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display DSL version information
and available capabilities.
display dsl version interface atm
interface-number [ | { begin | exclude |
include } regular-expression ]
Available in any view.