R2511-HP MSR Router Series IP Multicast Command Reference(V5)

91
Use undo pim sm to disable PIM-SM.
Syntax
pim sm
undo pim sm
Default
PIM-SM is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command can take effect only after IP multicast routing is enabled in the corresponding instance.
Examples
# Enable IP multicast routing on the public network, and enable PIM-SM on Ethernet 1/1.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim sm
Related commands
• multicast routing-enable
• pim dm
pim state-refresh-capable
Use pim state-refresh-capable to enable the state refresh feature on the interface.
Use undo pim state-refresh-capable to disable the state refresh feature.
Syntax
pim state-refresh-capable
undo pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Default command level
2: System level
Examples
# Disable state refresh on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1